Emergency HOBART Equipment Repair (London & Home Counties)
When a dishwasher, glasswasher, or prep machine fails mid-service, you need a rapid, reliable emergency HOBART equipment repair with proper diagnostics, safe workmanship, and a fix that lasts. Fix & Repair Engineers provide responsive callouts, servicing, and Planned Preventative Maintenance (PPM) for HOBART commercial catering equipment across London and the Home Counties.
Book NowService Areas
Our HOBART repair engineers provide fast, reliable emergency service across London and the Home Counties. Wherever you're based, expert help is just a phone call away.
HOBART equipment is built for high standards – but downtime still happens
HOBART is widely recognised for commercial warewashing and also supports broader kitchen needs including food preparation (e.g., mixers, cutter mixers, slicers and peelers) and cooking solutions through associated ranges (such as Bonnet/ELRO within the UK offering). Even high-quality equipment can break down due to heavy usage, hard water scale, blocked filtration, worn components, heating faults, drainage restrictions, chemical dosing issues, or electrical failures.
Our job is to restore performance quickly and safely and help you prevent the same fault coming back.
Not just HOBART dishwasher / glasswasher repairs
Many engineers only focus on undercounter machines but HOBART kitchens often run mixed systems and higher-throughput warewashing. We commonly support:
We can also help with HOBART food preparation equipment where installed, such as mixers, cutter mixers, slicers and peelers especially in production kitchens and bakeries.
What makes Fix & Repair Engineers the best fit for emergency HOBART equipment repair?
When warewashing goes down, it impacts hygiene, turnaround time, and service speed. We're set up to support busy sites with a repair-first approach and clear next steps.
You can expect:
Structured Fault-Finding
Structured fault-finding (root cause, not guesswork)
Fast Attendance
Fast attendance where possible for urgent breakdowns
Transparent Recommendations
Transparent recommendations if parts are required (including lead times)
Operational Testing
Operational testing after repair (fill, heat, wash, rinse, drain)
Multi-Site Support
Support for single sites and multi-site operators across our region
Servicing & PPM
Servicing and PPM to cut breakdown risk and improve reliability
First-visit fixes start with the right information
To speed up diagnosis (and improve first-visit outcomes), share the following when booking:
Model and Serial Number
Model and serial number (a photo of the rating plate is perfect)
Fault Symptoms
The fault symptoms (e.g., not filling, not heating, not draining, stopping mid-cycle)
Fault Behaviour
Whether it's intermittent or constant
Recent Changes
Any recent changes (chemicals, water supply pressure, softener, drainage setup, relocation)
Common HOBART faults we fix
These are some of the most frequent issues we see on HOBART warewashing and related equipment:
- Not filling / slow fill / overfilling
- Not heating / poor wash or rinse temperature
- Not draining / water left in the tank
- Cycle stopping mid-wash / cutting out
- Poor wash results (cloudy glasses, streaking, spotting)
- Wash arms not turning / blocked jets / filtration issues
- Chemical dosing-related performance problems (results and hygiene consistency)
- Door safety switch faults (won't start or stops mid-cycle)
If the issue is performance-related (not a hard breakdown), the cause is often a combination of water quality (hard water/limescale), filtration/cleaning routines, chemical setup, and installation conditions and we'll help you pinpoint what's really driving the problem.
Servicing & Planned Preventative Maintenance (PPM) for HOBART equipment
Emergency repairs are sometimes unavoidable but many breakdowns are preventable with routine servicing and checks.
A tailored PPM plan can help you:
Reduce Emergency Callouts
Reduce emergency callouts and disruption
Maintain Wash Performance
Maintain consistent wash performance and hygiene outcomes
Catch Wear Early
Catch wear early (before it becomes a service-stopping failure)
Extend Equipment Lifespan
Extend equipment lifespan and protect your investment
FAQs: Emergency HOBART Equipment Repair
Yes, we cover London, Essex, Kent, Suffolk, Hertfordshire, Berkshire, Oxfordshire, Hampshire, Buckinghamshire, Cambridgeshire, Surrey and Sussex.
We repair and service a wide range of HOBART commercial kitchen equipment, commonly including undercounter dishwashers and glasswashers, hood-type machines, rack conveyor/flight-type dishwashers, utensil washers, plus related food prep equipment where installed.
Sometimes, but not always. Clouding/streaking can be caused by water hardness and limescale, incorrect chemicals, blocked filtration, rinse issues, or wash arm problems. We'll diagnose whether it's a mechanical fault, setup issue, or maintenance need.
Emergency bookings may be available evenings and weekends (subject to engineer availability). The fastest way to secure help is to call or book online with your model details.
If safe, stop using the unit, note the symptoms, and take a photo of the rating plate/model number. Don't attempt internal electrical repairs. If there's any safety concern (smell, tripping, overheating), isolate the unit and contact us.
Yes. We offer one-off servicing and structured PPM programmes to reduce breakdown risk and keep wash performance consistent: https://fixandrepairengineers.co.uk/planned-preventative-maintenance/
Book Emergency HOBART Equipment Repair Today
If your HOBART dishwasher, glasswasher, or warewashing line is down – or performance is slipping and service is suffering – contact Fix & Repair Engineers for fast, professional emergency HOBART equipment repair across London and the Home Counties.
Book Online 020 4616 5598 | 01206 481 986